MetaCell MCT Korea is an autologous regenerative skin treatment designed for patients who want to improve overall skin quality, elasticity, fine lines, dullness, and recovery after selected energy-based procedures.
At LABE Plastic Surgery in Songdo, Incheon, MetaCell MCT Korea is prepared using a Zimmer Biomet kit, a Zimmer centrifuge system, and a MetaCell MCT kit. The treatment is planned by a board-certified plastic surgeon according to the patient’s skin condition, treatment area, and recovery goal.
LABE Plastic Surgery is located about 30–35 minutes by car from Incheon International Airport, making it convenient for international patients, short-term visitors, business travelers, and patients who want regenerative skin treatment in Korea without traveling deep into Seoul.
MetaCell MCT is not a filler and it is not botulinum toxin. It is better understood as an autologous skin regeneration program using the patient’s own blood-derived components, prepared through a controlled process before being delivered into selected skin areas.
What Is MetaCell MCT Korea?
MetaCell MCT Korea is a regenerative skin treatment that uses the patient’s own blood-derived PRP and PPP, prepared through a Zimmer Biomet kit and then processed through the MetaCell MCT kit.
The purpose is not to create instant volume like a hyaluronic acid filler. Instead, MetaCell MCT is planned to support the skin environment, improve skin texture, help with elasticity, and assist recovery when combined with laser, RF, ultrasound, or collagen-stimulating treatments.
Patients often consider MetaCell MCT Korea when their skin looks thin, tired, dry, dull, or less resilient than before. It can also be considered after procedures such as HALO laser, UltraPulse Alpha CO2 laser, XERF, Ultherapy PRIME, or other treatments where skin recovery and regeneration are important.
The key point is that MetaCell MCT should not be performed in the same way for every patient. Skin thickness, facial volume, under-eye thinness, cheek texture, pore pattern, fine wrinkles, previous laser history, and treatment goals should all be evaluated before deciding the method and treatment range.
Why the Zimmer Biomet Kit Matters in MetaCell MCT Korea
At LABE Plastic Surgery, MetaCell MCT Korea is prepared using a Zimmer Biomet kit and a Zimmer centrifuge system.
The process begins by collecting a relatively small amount of the patient’s own blood. The collected blood is placed into the Zimmer Biomet kit and processed with the Zimmer centrifuge system. Through this centrifugation step, the blood components are separated into PRP and PPP layers.
This separation step is important because MetaCell MCT Korea is not simply a standard PRP injection. After PRP and PPP are separated, they are transferred into the MetaCell MCT kit in a controlled ratio selected by the physician. The material then undergoes a photothermal reaction process before being used for treatment.
The reason we use the Zimmer Biomet kit is that it allows high-quality PRP and PPP to be separated clearly even with a relatively small amount of blood. If PRP and PPP are mixed too early or not separated properly, it becomes difficult for the physician to adjust the ratio accurately during the MetaCell MCT photothermal reaction process.
In other words, the Zimmer Biomet kit helps prepare cleanly separated PRP and PPP, while the MetaCell MCT kit allows the physician to combine them in the intended ratio before photothermal activation. This controlled preparation process is one of the key steps that defines MetaCell MCT Korea at LABE Plastic Surgery.
Because the quality of MetaCell MCT depends not only on the material itself but also on the preparation process, the treatment is planned and performed by a board-certified plastic surgeon. The doctor determines the PRP-to-PPP ratio, treatment method, injection depth, and treatment area based on the patient’s skin condition and treatment goal.
MetaCell MCT Korea Procedure Process
The MetaCell MCT Korea process at LABE Plastic Surgery is carefully structured from blood collection to final delivery.
Step 1. Consultation and Skin Mapping
Before treatment, a board-certified plastic surgeon evaluates the patient’s skin condition.
We check skin thickness, skin texture, pores, fine lines, dullness, under-eye skin quality, cheek elasticity, previous laser history, and the patient’s recovery goal.
This step determines whether MetaCell MCT should be used for full-face skin quality, under-eye skin, cheek texture, post-laser recovery, or combination treatment with devices such as HALO, UltraPulse Alpha, XERF, or Ultherapy PRIME.
Step 2. Blood Collection
A relatively small amount of the patient’s own blood is collected.
Because MetaCell MCT Korea is an autologous regenerative skin treatment, the starting material comes from the patient. The amount of blood needed may vary depending on the treatment scope, but the goal is to obtain enough PRP and PPP for the planned treatment area while keeping the process efficient.
Step 3. Centrifugation with the Zimmer Biomet Kit
The collected blood is placed into the Zimmer Biomet kit and processed using the Zimmer centrifuge system.
This step separates the blood into PRP and PPP layers. The Zimmer Biomet kit is used because it helps separate PRP and PPP clearly, even from a relatively small blood volume. Clear separation is important because PRP and PPP need to be handled separately before being combined in the intended ratio.
Step 4. PRP and PPP Ratio Design
After centrifugation, the separated PRP and PPP are prepared for the MetaCell MCT process.
The physician decides how much PRP and PPP should be used depending on the treatment goal. Thin skin, dull skin, post-laser recovery, fine lines, and broad skin quality improvement may require different planning.
This is why PRP and PPP should not be mixed randomly. A controlled ratio allows the physician to design the MetaCell MCT preparation more precisely.
Step 5. Photothermal Reaction in the MetaCell MCT Kit
The selected PRP and PPP are placed into the MetaCell MCT kit and undergo a photothermal reaction process.
This step is what differentiates MetaCell MCT from a simple PRP or PPP injection. The treatment material is prepared through the MetaCell MCT kit after the physician has adjusted the PRP-to-PPP ratio according to the patient’s skin condition and treatment purpose.
Step 6. Delivery into the Planned Treatment Area
After preparation, MetaCell MCT is delivered into the planned treatment area.
Depending on the skin condition and treatment area, delivery may be performed by micro-needle manual injection, cannula delivery, or as part of a combination treatment after energy-based procedures. The injection depth, amount, spacing, and treatment range are adjusted by the board-certified plastic surgeon.
MetaCell MCT Korea Treatment Methods
MetaCell MCT Korea can be delivered through different treatment methods depending on the skin condition and treatment goal.
Micro-Needle Manual Injection
Micro-needle manual injection is useful when the goal is to place the prepared MetaCell MCT material precisely into areas with fine lines, thin skin, pores, or texture concerns.
This method can be considered for:
- under-eye skin quality
- fine lines
- cheek texture
- pore-prone areas
- thin and dull skin
- areas that need detailed placement
Manual injection allows the doctor to adjust the injection depth, spacing, and amount according to the skin.
Cannula Delivery
Cannula delivery can be considered for broader areas where a softer and wider distribution is needed.
This method can be considered for:
- anterior cheek
- nasolabial area
- midface skin quality
- cheek dullness
- broad texture improvement
- areas where bruising risk needs to be considered carefully
Cannula delivery is not the same as filler injection. The goal is not to create volume like hyaluronic acid filler, but to distribute the regenerative material more broadly in selected areas.
Combination Treatment
MetaCell MCT Korea can also be combined with collagen-stimulating energy-based treatments.
It may be planned with HALO laser when skin texture, pores, and glow are important. It may be considered after UltraPulse Alpha when recovery support and dermal regeneration are part of the plan. It can also be combined with XERF, Ultherapy PRIME, RF microneedling, or other lifting treatments when the goal is to improve both skin quality and firmness.
Combination treatment should be customized. It is not always better to do everything at once. Skin condition, downtime, travel schedule, and sensitivity should all be considered.
Treatment Areas for MetaCell MCT Korea
The treatment scope of MetaCell MCT Korea can vary depending on the patient.
Common treatment areas include the full face, under-eye area, cheeks, nasolabial region, perioral area, jawline, neck, décolleté, and areas with texture or elasticity concerns.
Full Face
Full-face treatment is suitable for patients who want overall skin quality improvement. It can be considered when the skin looks dull, dry, thin, or tired.
Under-Eye Area
The under-eye area is thin and delicate. MetaCell MCT may be considered for under-eye skin quality, fine lines, and thin-looking skin. This area requires careful planning because bruising and swelling can be more noticeable.
Cheeks and Anterior Cheek
The cheeks are one of the most common areas for regenerative skin treatment. MetaCell MCT may help support skin texture, elasticity, and overall glow in this area.
Nasolabial and Perioral Area
The nasolabial and perioral areas often show fine lines, texture changes, and skin thinning. Depending on the patient, micro-injection or cannula delivery can be considered.
Jawline and Lower Face
For patients with lower-face skin quality concerns, jawline dullness, or mild texture changes, MetaCell MCT may be considered as part of a broader skin quality plan. If structural sagging is the main concern, lifting devices or surgical options may need to be discussed together.
Neck and Décolleté
For patients with neck texture, fine lines, or thin skin, MetaCell MCT may be considered as part of a broader skin quality program. Treatment depth and injection method should be selected carefully.
Post-Laser Recovery Areas
MetaCell MCT can be considered after procedures such as HALO laser or UltraPulse Alpha when the goal is to support skin recovery and regenerative response.
Who May Consider MetaCell MCT Korea?
MetaCell MCT Korea may be considered for patients who want to improve skin quality rather than simply add volume.
It may be suitable for patients with:
- thin-looking skin
- dull skin tone
- fine lines
- loss of elasticity
- rough texture
- post-laser recovery needs
- under-eye skin quality concerns
- cheek texture changes
- slow-aging skin management goals
- interest in autologous regenerative treatment in Korea
However, MetaCell MCT is not a replacement for surgery, filler, botulinum toxin, or lifting devices. If the main problem is severe sagging, volume loss, deep folds, or fat protrusion, other treatments may be needed together.
MetaCell MCT Korea near Incheon Airport
LABE Plastic Surgery is located in Songdo, Incheon, about 30–35 minutes by car from Incheon International Airport.
This location is convenient for international patients who are visiting Korea for a short time. Patients searching for MetaCell MCT Korea near Incheon Airport often want a treatment that can be planned around travel, business schedules, or a short stay.
Because MetaCell MCT can involve injections and sometimes combination treatment with laser or RF, the schedule should be planned carefully. If you are flying soon, attending an event, or combining the treatment with HALO, UltraPulse Alpha, XERF, Ultherapy PRIME, or hyperbaric oxygen therapy, it is better to discuss your travel timeline during consultation.
MetaCell MCT Korea at LABE Plastic Surgery
At LABE Plastic Surgery, MetaCell MCT Korea is not performed as a simple package injection.
The procedure is planned by a board-certified plastic surgeon based on the patient’s skin quality, facial anatomy, recovery goal, and treatment area. The Zimmer Biomet kit preparation process, Zimmer centrifugation, PRP and PPP separation, MetaCell MCT kit photothermal reaction, delivery method, and treatment scope are all considered together.
For some patients, the best plan may be full-face micro-injection. For others, cannula delivery around the cheek or nasolabial area may be better. For patients receiving laser resurfacing or collagen-stimulating treatments, MetaCell MCT may be used as part of a regenerative recovery program.
The goal is to improve the skin environment, not to create an artificial or overfilled look.
MetaCell MCT Korea FAQ
Q1. What is MetaCell MCT Korea?
MetaCell MCT Korea is an autologous regenerative skin treatment prepared using the patient’s own blood-derived PRP and PPP. At LABE Plastic Surgery, the material is prepared with a Zimmer Biomet kit, Zimmer centrifuge system, and MetaCell MCT kit before treatment.
Q2. Why is the Zimmer Biomet kit used for MetaCell MCT Korea?
The Zimmer Biomet kit is used to separate PRP and PPP clearly from a relatively small amount of the patient’s own blood. This separation is important because PRP and PPP should be combined in a controlled ratio before the MetaCell MCT photothermal reaction process.
At LABE Plastic Surgery, the separated PRP and PPP are placed into the MetaCell MCT kit according to the physician’s planned ratio, then processed through photothermal reaction before treatment. This allows MetaCell MCT Korea to be prepared as a structured autologous regenerative skin treatment rather than a simple PRP injection.
Q3. Is MetaCell MCT the same as filler?
No. MetaCell MCT is not a hyaluronic acid filler. It is not mainly used to create volume. It is planned to support the skin environment, texture, elasticity, and regenerative recovery.
Q4. How is MetaCell MCT performed?
At LABE Plastic Surgery, MetaCell MCT begins with consultation and skin mapping. A small amount of blood is collected, placed into the Zimmer Biomet kit, and processed with the Zimmer centrifuge system. After PRP and PPP are separated, the physician combines them in the intended ratio inside the MetaCell MCT kit and proceeds with the photothermal reaction process. The final material is then delivered by micro-needle manual injection, cannula delivery, or as part of a combination treatment plan.
Q5. Which areas can be treated with MetaCell MCT?
Common areas include the full face, under-eye area, cheeks, anterior cheek, nasolabial region, perioral area, jawline, neck, décolleté, and post-laser recovery areas. The final treatment scope depends on the patient’s skin condition and treatment goal.
Q6. Can MetaCell MCT be combined with HALO or UltraPulse Alpha?
Yes. MetaCell MCT can be considered as part of a regenerative recovery program after HALO laser or UltraPulse Alpha CO2 laser. It may also be combined with XERF, Ultherapy PRIME, RF microneedling, or other collagen-stimulating procedures depending on the patient’s skin condition.
Q7. Is MetaCell MCT Korea suitable for international patients?
Yes. LABE Plastic Surgery is located in Songdo, Incheon, about 30–35 minutes from Incheon International Airport. International patients can discuss their travel schedule, downtime, and combination treatment plan during consultation.
Summary
MetaCell MCT Korea is an autologous regenerative skin treatment prepared with the patient’s own blood-derived PRP and PPP.
At LABE Plastic Surgery in Songdo, Incheon, the process uses a Zimmer Biomet kit, Zimmer centrifuge system, and MetaCell MCT kit. After blood collection and centrifugation, PRP and PPP are separated clearly, combined in a physician-designed ratio, and processed through a photothermal reaction before treatment.
The treatment can be delivered through micro-needle manual injection, cannula delivery, or combination treatment with procedures such as HALO laser, UltraPulse Alpha, XERF, Ultherapy PRIME, and hyperbaric oxygen therapy.
The treatment scope may include the full face, under-eye area, cheeks, nasolabial region, perioral area, jawline, neck, décolleté, and post-laser recovery areas.
For patients looking for MetaCell MCT Korea near Incheon Airport, LABE Plastic Surgery offers a board-certified plastic surgeon-led regenerative skin treatment program focused on skin texture, elasticity, fine lines, dullness, and recovery support.
